-51%

Stronghero3D PETG 3D Printer Filament 1.75Mm Carbon Fiber 1Kg

$81.99 $40.99

In StockIn StockOut of stock

PETG with carbon fiber powder infill not long fiber, strength better normal PETG , strong and tough,colour is black Nozzle temp,220-230 degree, hotbed 70 degree, speed 25mm/s,retraction length 4mm, retraction speed...

Out of stock
  • PETG with carbon fiber powder infill not long fiber, strength better normal PETG , strong and tough,colour is black
  • Nozzle temp,220-230 degree, hotbed 70 degree, speed 25mm/s,retraction length 4mm, retraction speed 50mm/s,
  • 1kg/Spool,Vacuumed Sealed With Desiccant inside,then in small box. 1.75mm Filament Diameter (Dimensional Accuracy +/- 0.05mm).
  • Strong layer adhesion Hardly shrinking 0.2-0.5%, barely warping Tough and break resistant: Strength 105R,Slight gloss in finish,Resistant to acids and alkalis and Does not absorb water.
  • We make each roll and each point been inspection qualify,hard quality control

Polyethylene terephthalate (PET) is the most commonly used plastic in the world. Best known as the polymer used in water bottles, it is also found in clothing fibers and food containers. While “raw” PET is rarely used in 3D printing, its variant PETG is a popular 3D printer filament.

 MORE INFORMATION

The ‘G’ in PETG stands for “glycol-modified”,and the result is a filament which is clearer, less brittle, and mostimportantly, easier to use than its base form. For this reason, PETG is often considered a good middle ground between ABS and PLA, the two most commonly used types of 3D printer filament, as it is more flexible and durable than PLA and easier to print than ABS.

Three things 3D printer enthusiasts should keep in mind when using PETG:

1.       PETG is hygroscopic, meaning it absorbs moisture from the air. As this has a negative effect on printing, make sure to store the 3Dprinter filament in a cool, dry place.

2.       PETG is sticky during printing, making this 3D printer filament a poor choice for support structures, but good for layer adhesion. (Just be careful with the print bed!)

3.       Though not brittle, PETG scratches more easily than ABS.

Polyethylene coTrimethyleneTerephthalate (PETT) is another PET variant. Slightly more rigid than PETG,this 3D printer filament is popular for being transparent.

3D Printer filament Properties: PETG(PET, PETT)

·       Strength: High| Flexibility: Medium |Durability: High

·       Difficulty to use: Low

·       Print temperature: 220°C – 250°C

·       Print bed temperature: 50°C – 75°C

·    &

Sunday,Monday,Tuesday,Wednesday,Thursday,Friday,Saturday
January,February,March,April,May,June,July,August,September,October,November,December
Not enough items available. Only [max] left.
Browse WishlistRemove Wishlist
Shopping cart

Your cart is empty.

Return To Shop

Add Order Note Edit Order Note
Estimate Shipping
Add A Coupon

Estimate Shipping

Add A Coupon

Coupon code will work on checkout page

Stronghero3D PETG 3D Printer Filament 1.75Mm Carbon Fiber 1Kg

$81.99 $40.99